EIB-18
Provides microwire connections to a 16/18 channel headstage with Omnetics 26 pin connectors.
Mounts directly on a Harlan 4 Drive.
Omnetics 26 pin (Male) connector with 2 guidepost holes.
- Supports 2 differential stimulus channel lines
| Channels | 16 |
| References | 2 |
| Differential Stim Lines | 2 |
| Grounds | 1 |
| Mass | 0.4 grams |
| Length | 13.2 mm |
| Width | 10.4 mm |
| Height | 5.8 mm |
| EIB Pins | Large |
| Connection | Omnetics 26 Pin |
| Microdrive | Harlan 4 |
*Neuralynx is not a distributor of Omnetics parts.
Catalog Number
31-0603-0108
Large EIB Pins
Gold pins used for making the connection between the electrode wire and Electrode Interface Board (EIB).
Harlan 4 Drive
Reusable 4 tetrode drive with pre-drilled exit holes. For use with EIB-16 and EIB-16-QC-H.
HS-16
Buffered 16 channel headstage with shielded Litz wire tether and µDB37 connector.
HS-16-CNR-MDR50
Buffered 16 channel headstage with Cooner wire tether and MDR50 connector.
HS-16-CNR-LED-MDR50
Buffered 16 channel headstage with Cooner wire tether and MDR50 connector.
HS-16-LED
Buffered 16 channel headstage with shielded Litz wire tether and µDB37 connector.
HS-18
Buffered 18 channel headstage with shielded Litz wire tether and Omnetics µDB37 connector.
HS-18-CNR-MDR50
Buffered 18 channel headstage with Cooner wire tether and MDR50 connector.
HS-18-CNR-LED-MDR50
Buffered 18 channel headstage with 3m Cooner wire tether and MDR50 connector.
HS-18-LED
Buffered 18 channel headstage with shielded Litz wire tether and µDB37 connector, and video tracking LED sockets.