LabLynx Portable System

A low-cost, wide bandwidth, portable acquisition system.

Schedule A Demo

The LabLynx acquisition system is a battery-powered wireless device that records electrophysiology data from digital multiplexing headstages and transmits to a router up to 10 meters distant (depending on environment.) Unlike the FreeLynx, LabLynx is not a subject-mounted device. Instead, LabLynx receives digitized neural signals from up to 4 lightweight, wired, digital multiplexing headstages (HS-xx-mux) for 16 to 256 recording channels.

With its small size and minimal setup requirements, LabLynx is easily moved between experiment locations – ideal for use in new or established labs and in the classroom. Very flat frequency response from each electrode accurately records both low-frequency Alpha and Theta oscillations, and high-frequency Single Unit Action Potentials.


Headstage Connections   4 X µDB25
Frequency Range   0.1 Hz to 8 kHz from each electrode
Noise   < 2.5 μV RMS (input referred)
CMMR   >80 dB at 60 Hz
Power Source   AC or rechargeable battery
Battery Run Time   6 – 10 hours
Dimensions   68 x 111 x 38 mm

Solid Research Capabilities

As a battery-powered device, LabLynx is not exposed to noise from AC power lines during recording. LabLynx has digital I/O ports for experiment control and may be configured for optogenetics experiments. With a full-featured Cheetah license included, LabLynx is a very cost-effective and capable entry acquisition system for electrophysiology when paired with low-cost Digital Multiplexing Headstages.

  • 10 pin, 0.05″ pitch Mill-Max connector
  • 24 pin, 0.10″ pitch 3M TTL connector
  • Up to 8 GPIO for TTL inputs
  • Rechargeable Li-ion battery
  • Mini USB battery charging port

Low-Cost Digital Multiplexing Headstages

LabLynx uses Digital Multiplexing (MUX) Headstages, digitizing neural signals on the headstage to reduce wire count, weight, size, and cost. These headstages are available in 16, 32, or 64 channels. Optional 36-pin Omnetics connectors (32/64 channels) interface implants and EIBs from other manufacturers. MUX headstages are available with built-in Fiber-mounted LED (FLED) signal lines for use with our simplified optogenetic stimulation solutions.

  • Optional video tracking LEDs
  • FLEDs for optogenetics stimulation (32 or 64 channels)
  • Omnetics nano 44 position connectors for Neuralynx EIBs
  • Optional Omnetics nano 36 position (PTB) connectors for 3rd-party devices
  • 1, 2, or 3 meter standard tether lengths

MUX Headstage Specifications


Sampling Rate   30 kHz
A/D Resolution   16 bit
Input Range   +/- 5 mV
References   1 fixed
Tether   twisted pair digital


Get A Quote

Contact Us

Video Tracking

All Neuralynx acquisition systems are compatible with our video tracking solutions, supporting position, navigation, head direction and grid cell studies with multiple targets. Video tracking data is synchronized with neural signal data by Cheetah Software, enabled through a separate VTS license.


Utilize a simple, lightweight, easy-to-use optogenetic stimulus solution: Halo Microdrives and Fiber Mounted LEDs (FLEDs). These devices incorporate an independently-adjustable light source into the microdrive as an additional shuttle, delivering consistent blue, green, amber, or red wavelengths without additional optical connections, patch cords, ferrules, or FORJ. Ask your sales representative for more details.