EIB-16
Provides microwire connections to a 16/18 channel headstage with Omnetics 18 pin connectors.
Mounts directly on Harlan 4 Drive.
- Does NOT support stimulus channels
| Channels | 16 |
| References | 0 |
| Differential Stim Lines | 0 |
| Grounds | 1 |
| Mass | 0.2 grams |
| Length | 10.0 mm |
| Width | 10.1 mm |
| Height | 5.5 mm |
| EIB Pins | Large |
| Connection | Omnetics 18 Pin |
| Microdrive | Harlan 4 |
*Neuralynx is not a distributor of Omnetics parts.
Catalog Number
31-0603-0106
HS-16
Buffered 16 channel headstage with shielded Litz wire tether and µDB37 connector.
HS-16-LED
Buffered 16 channel headstage with shielded Litz wire tether and µDB37 connector.
HS-18
Buffered 18 channel headstage with shielded Litz wire tether and Omnetics µDB37 connector.
HS-18-CNR-LED-MDR50
Buffered 18 channel headstage with 3m Cooner wire tether and MDR50 connector.
HS-18-CNR-MDR50
Buffered 18 channel headstage with Cooner wire tether and MDR50 connector.
Harlan 4 Drive
Reusable 4 tetrode drive with pre-drilled exit holes. For use with EIB-16 and EIB-16-QC-H.
Large EIB Pins
Gold pins used for making the connection between the electrode wire and Electrode Interface Board (EIB).
HS-16-N2T-CNR-MDR50
Buffered 16 channel headstage with Cooner wire tether and MDR50 connector.
HS-16-N2T-CNR-LED-MDR50
Buffered 16 channel headstage with Cooner wire tether and MDR50 connectors.
HS-16-mux
16 channel multiplexing (MUX) headstage for digitizing analog neural signals on the headstage.
HS-16-mux-LED
16 channel multiplexing (MUX) headstage for digitizing analog neural signals on the headstage.