Imp V.2
State-of-the-art in automatic impedance measurement and electroplating
Automated Impedance testing for large channel count electrode arrays. Connect Imp to a computer, download software, connect electrodes, and test.
- Test 128 channels in under 25 seconds (mode/computer dependent)
- Electroplate a wide range of electrodes
- State of the art accuracy for any electrode
- More customizable measurements than headstages
The Imp Samtec connectors are compatible with all array connectors:
- Modular Bionics N-Form® 32 – 128 channel chronic probes (connector adaptors)
- Acute 32 – 128 channel silicon probes from Cambridge NeuroTech, NeuroNexus, and Atlas Neuroengineering. (direct connection)
- Chronic 96 – 128 channel probes from Blackrock (connector adaptors)
- Electrodes requiring custom adapters (inquire at sales@modularbionics.com)
For information, please call 1-800-326-2905 or email support@neuralynx.com
ADPT-NZ-EIB-18
Connects an EIB-16/18 to the nanoZ for electrode plating, impedance measurement and probe reconditioning. For use with the Warp 16 Drive.
ADPT-NZ-EIB-36
Connects EIB-36s to the nanoZ for electrode plating, impedance measurement and probe reconditioning.
ADPT-NZ-N2T-16
Connects either NeuroNexus C16 or MR16 probes to the nanoZ for electrode plating, impedance measurement and probe reconditioning.
ADPT-NZ-N2T-32
Connects NeuroNexus C32, MR32 and F probes to the nanoZ for electrode plating, impedance measurement and probe reconditioning.
ADPT-NZ-Versa
Connects VersaDrives to the nanoZ for electrode plating, impedance measurement and probe reconditioning.