ADPT-HS18-N2T-16R
Holds and connects a NeuroNexus 16 channel probe (CM/OCM/H/HC/P series) to a 16/18 channel headstage. Required when reference site on probe is unused.
No plastic STX holder is available for this adapter.
Note: Neuralynx does NOT sell NeuroNexus probes – only compatible adapters and holders.
| Channels | 16 |
| References | 1 |
| Differential Stim Lines | 0 |
| Grounds | 1 |
| Probe Connector | Omnetics 18 socket |
| Headstage Connector | Omnetics 28 pin |
| Mass | 0.4 grams |
| Length | 16.3 mm |
| Width | 10.6 mm |
| Height | 2.7 mm |
Catalog Number
31-0602-0105
HS-16
Buffered 16 channel headstage with shielded Litz wire tether and µDB37 connector.
HS-16-LED
Buffered 16 channel headstage with shielded Litz wire tether and µDB37 connector.
HS-16-N2T-CNR-MDR50
Buffered 16 channel headstage with Cooner wire tether and MDR50 connector.
HS-16-N2T-CNR-LED-MDR50
Buffered 16 channel headstage with Cooner wire tether and MDR50 connectors.
HS-18
Buffered 18 channel headstage with shielded Litz wire tether and Omnetics µDB37 connector.
HS-18-LED
Buffered 18 channel headstage with shielded Litz wire tether and µDB37 connector, and video tracking LED sockets.
HS-18-CNR-MDR50
Buffered 18 channel headstage with Cooner wire tether and MDR50 connector.
HS-18-CNR-LED-MDR50
Buffered 18 channel headstage with 3m Cooner wire tether and MDR50 connector.