EIB-36-16TT
Provides microwire connections to two 36 channel headstages with Omnetics 44 pin connectors.
Mounts directly on a Halo-18 Microdrive.
- Supports 8 differential stimulus channel lines
Channels | 64 |
References | 4 |
Differential Stim Lines | 8 |
Grounds | 1 |
Mass | 1.2 grams |
Length | 22.2 mm |
Width | 18.4 mm |
Height | 6.0 mm |
EIB Pins | Small |
Connection | Omnetics 44 Pin X 2 |
Microdrive | Halo-18 |
*Neuralynx is not a distributor of Omnetics parts.
Catalog Number
31-0603-0120
![](https://neuralynx.fh-co.com/wp-content/uploads/2023/06/Halo-18_QC-Eib.png)
Halo-18 Microdrive
Provides up to 18 independently drivable shuttles to position up to 16 tetrodes with 11mm shuttle travel. Two additional shuttles available for fiber optics or reference electrodes.
![](https://neuralynx.fh-co.com/wp-content/uploads/2023/06/eib-pins-small.png)
Small EIB Pins
Gold pins used for making the connection between the electrode wire and Electrode Interface Board (EIB).
![](https://neuralynx.fh-co.com/wp-content/uploads/2023/06/EIB-36-Plating-Adapter-3.png)
EIB-36 Plating Adapter
A simple interface for allowing impedance measurements during electrode plating of 36 channel electrode interface boards (EIBs), with direct access to each channel.
![](https://neuralynx.fh-co.com/wp-content/uploads/2023/06/HS-36-web.png)
HS-36
Buffered 36 channel headstage with Omnetics 44 connector.
![](https://neuralynx.fh-co.com/wp-content/uploads/2023/06/HS36-LED.png)
HS-36-LED
Buffered 36 channel headstage with Omnetics 44 connector.