EIB-36 Plating Adapter
A simple interface for allowing impedance measurements during electrode plating of 36 channel electrode interface boards (EIBs), with direct access to each channel.
For use with the Tetrode Assembly Station.
Included:
- Stereotaxic Device: mounts to Tetrode Assembly Station for hands-free stabilization during measurement.
Sold Separately:
- ADPT-EIB-36-QC-HS-36
Required for connection to QuickClip EIB-36-QC .
| Mass | 2.2 grams |
| Length | 58.8 mm |
| Width | 22.5 mm |
| Height | 2.7 mm |
Catalog Number
31-0602-0134
EIB-36
Provides microwire connections to a 36 channel headstage with Omnetics 44 pin connectors.
EIB-36-12TT
Provides microwire connections to two 36 channel headstages with Omnetics 44 pin connectors.
EIB-36-16TT
Provides microwire connections to two 36 channel headstages with Omnetics 44 pin connectors.
EIB-36-18 Drive
Provides microwire connections to two 36 channel headstages with Omnetics 44 pin connectors.
EIB-36-24TT
Provides microwire connections to three 36 channel headstages with Omnetics 44 pin connectors.
EIB-36-9 Drive
Provides microwire connections to a 36 channel headstage with Omnetics 44 pin connectors.
EIB-36 Narrow
Provides microwire connections to a 36 channel headstage with Omnetics 44 pin connectors.
ADPT-EIB-36-QC-HS-36
Allows use of a 36 channel headstage with QuickClip® 36 EIBs.
Gold Plating Solution
Gold non-cyanide (NC) solutions for plating tetrodes and other electrophysiology electrodes.
Platinum Black Plating Solution
Platinum Black solutions for plating tetrodes and other electrophysiology electrodes.
Tetrode Assembly Station
Workstation base and all necessary items (except the wire) to create custom tetrodes, as well as twisted wire electrodes of any type.