Buffered 16 channel headstage with QuickClip® connectors and video tracking LED sockets

For use with Halo-5 and Harlan 4 microdrives.

HS-16-QC-LED features Neuralynx’s patented QuickClip® connection method, allowing the headstage to magnetically self-align and then initiate the connection to the electrode interface board with minimal insertion force. Connection is completed with a simple “snap.”

  • near zero insertion force
  • no exposed pins to bend or break
  • high number of connect/disconnect cycles without loss of signal
  • 2 sockets for 10V video tracking LEDs
  • Note: Blue, Red, Green or Infrared 10V Video Tracking LEDs sold separately.
Catalog Number


Channels   16
References   2
Differential Stim Lines   2 pair
Grounds   1
Mass   1.4 grams
Diameter   17.0 mm
Video Tracking LEDs   2 sockets
Input Connector   QuickClip 16
Output Connector   Omnetics 26 pin
Tether   sold separately

Provides microwire connections to a 16 channel headstage with QuickClip® connectors.

EIB-16-QC Page

Provides microwire connections to a 16 channel headstage with QuickClip® connectors.

EIB-16-QC-H Page
10V Video Tracking LEDs

10V video tracking LEDs for 16/18/27/36 channel and 16 channel QuickClip headstages with LED sockets.

10V Video Tracking LEDs Page
Halo-5 Microdrive

Provides up to 5 independently drivable shuttles to position up to 4 tetrodes with 6mm shuttle travel. 1 additional shuttle available for fiber optics or reference electrodes.

Halo-5 Microdrive Page
Harlan 4 Drive

Reusable 4 tetrode drive with pre-drilled exit holes. For use with EIB-16 and EIB-16-QC-H.

Harlan 4 Drive Page
Saturn Commutator

Low profile powered commutator for twist-free tethers, allowing subjects to exhibit more natural behavior and unencumbered movement

Saturn Commutator Page
Digital Lynx SX

High Performance, Expandable Recording System with Closed Loop Processing

Digital Lynx SX Page