EIB-36-QC-Simple
Provides microwire connections to a 36 channel headstage with QuickClip®.
Mounts directly on Halo-10 Microdrive and Harlan 8 Drive.
Patented QuickClip® connection method. Compatible with EIB-36 Plating Adapter, but requires ADPT-EIB-36-QC-HS-36.
- Magnetically self-aligning
- Less stress on animal and researcher
- High cycle count connector
- Near zero insertion force and no exposed pins to bend or break
- Low profile reducing head torque
Sold Separately:
- QC-36-Cover
Cover for QuickClip® EIBs and adapters to protect connectors from damage or debris.
Catalog Number
31-0603-0003
| Channels | 32 |
| References | 4 |
| Differential Stim Lines | 2 |
| Grounds | 1 |
| Mass | 0.9 grams |
| Length | 21.3 mm |
| Width | 11.4 mm |
| EIB Pins | Small |
| Connection | QuickClip 36 |
| Microdrives | Halo-10, Harlan 8 |
HS-36-QC
Buffered 36 channel headstage with QuickClip® connectors.
HS-36-QC-LED
Buffered 36 channel headstage with QuickClip® connectors and attached video tracking LEDs.
Halo-10 Microdrive
Provides up to 10 independently drivable shuttles to position up to 8 tetrodes with 11mm shuttle travel. Two additional shuttles available for fiber optics or reference electrodes.
Harlan 8 Drive
Reusable 8 tetrode drive with solid tip that allows researchers to drill custom exit pattern. For use with standard EIB-36.
ADPT-EIB-36-QC-HS-36
Allows use of a 36 channel headstage with QuickClip® 36 EIBs.
EIB-36 Plating Adapter
A simple interface for allowing impedance measurements during electrode plating of 36 channel electrode interface boards (EIBs), with direct access to each channel.
Small EIB Pins
Gold pins used for making the connection between the electrode wire and Electrode Interface Board (EIB).
QC-36-Cover
Cover for QuickClip® EIBs and adapters to protect connectors from damage or debris.