HS-16 QC Litz Tether with FLED Support
Lightweight, flexible, shielded Litz wire tether that connects a 16 channel QuickClip® headstage to the Digital Lynx SX system.
For use with Halo-5 Microdrive and Fiber Mounted LEDs (FLEDs). Connects directly to the analog acquisition system with the ADPT-HS-27-ERP-27 adapter OR through the Saturn Commutator.
- Carries LED drive current to Fiber Mounted LEDs
TETH-HS-18-uDB37-FLED-1M
31-0613-0019
TETH-HS-18-uDB37-FLED-2M
31-0613-0020
TETH-HS-18-uDB37-FLED-3M
31-0613-0021
| Configuration | Length |
|---|---|
| FLED TETH-HS-18-uDB37-1M 1 Meter Tether |
1 meter |
| FLED TETH-HS-18-uDB37-2M 2 Meter Tether |
2 meters |
| FLED TETH-HS-18-uDB37-3M 3 Meter Tether |
3 meters |
| Connector 1 | Omnetics 26 pin |
| Connector 2 | µDB37 |
| Diameter | 2.0 mm |
| Lengths | 1, 2, 3 meters |
| Shielded | Yes |
*Neuralynx is not an Omnetics distributor.
ADPT-HS-27-ERP-27
Connects the µDB37 output connector of a headstage tether to the MDR50 input of an acquisition system.
HS-16-QC
Buffered 16 channel headstage with QuickClip® connectors.
HS-16-QC-LED
Buffered 16 channel headstage with QuickClip® connectors and video tracking LED sockets
Halo-5 Microdrive
Provides up to 5 independently drivable shuttles to position up to 4 tetrodes with 6mm shuttle travel. 1 additional shuttle available for fiber optics or reference electrodes.
15mm or 33mm Fiber Mounted LEDs
Deliver optogenetic stimulation from directly inside a Halo microdrive.
Saturn Commutator
Low profile powered commutator for twist-free tethers, allowing subjects to exhibit more natural behavior and unencumbered movement
Digital Lynx SX
High Performance, Expandable Recording System with Closed Loop Processing