EIB-36-24TT
Provides microwire connections to three 36 channel headstages with Omnetics 44 pin connectors.
Mounts directly on a Harlan 28 Drive.
- Supports 6 differential stimulus channel lines
| Channels | 96 |
| References | 4 |
| Differential Stim Lines | 6 |
| Grounds | 4 |
| Mass | 0.7 grams |
| Length | 35.5 mm |
| Width | 35.5 mm |
| Height | 5.8 mm |
| EIB Pins | Small |
| Connection | Omnetics 44 Pin X 3 |
| Microdrive | Harlan 28 |
*Neuralynx is not a distributor of Omnetics parts.
Catalog Number
31-0603-0122
Harlan 28 Drive
Reusable 28 tetrode drive with solid tip that allows researchers to drill custom exit pattern. For use with standard EIB-36-24TT.
HS-36
Buffered 36 channel headstage with Omnetics 44 connector.
HS-36-LED
Buffered 36 channel headstage with Omnetics 44 connector.
Small EIB Pins
Gold pins used for making the connection between the electrode wire and Electrode Interface Board (EIB).
EIB-36 Plating Adapter
A simple interface for allowing impedance measurements during electrode plating of 36 channel electrode interface boards (EIBs), with direct access to each channel.
HS-32-mux
32 channel multiplexing (MUX) headstage for digitizing analog neural signals on the headstage.
HS-32-mux-LED
32 channel multiplexing (MUX) headstage for digitizing analog neural signals on the headstage.