Provides microwire connections to a 36 channel headstage with QuickClip® connectors.
Mounts directly on Halo-10 Microdrives and Harlan 8 Drives.
Patented QuickClip® connection method.
Compatible with EIB-36 Plating Adapter, but requires ADPT-EIB-36-QC-HS-36.
- Magnetically self-aligning
- Less stress on animal and researcher
- High cycle count connector
- Near zero insertion force and no exposed pins to bend or break
- Low profile reducing head torque
Cover for QuickClip® EIBs and adapters to protect connectors from damage or debris.
|Differential Stim Lines||2|
|Microdrives||Halo 10/18, Harlan 4/8|
Allows use of a 36 channel headstage with QuickClip® 36 EIBs.
Buffered 36 channel headstage with QuickClip® connectors and attached video tracking LEDs.
Provides up to 10 independently drivable shuttles to position up to 8 tetrodes with 11mm shuttle travel. Two additional shuttles available for fiber optics or reference electrodes.
Harlan 8 Drive
Reusable 8 tetrode drive with solid tip that allows researchers to drill custom exit pattern. For use with standard EIB-36.
Large EIB Pins
Gold pins used for making the connection between the electrode wire and Electrode Interface Board (EIB).
EIB-36 Plating Adapter
A simple interface for allowing impedance measurements during electrode plating of 36 channel electrode interface boards (EIBs), with direct access to each channel.