EIB-36
Provides microwire connections to a 36 channel headstage with Omnetics 44 pin connectors.
Mounts directly on a Halo-10 Microdrive or Harlan 8 Drive.
- Supports 2 differential stimulus channel lines
| Channels | 32 |
| References | 4 |
| Differential Stim Lines | 2 |
| Grounds | 2 |
| Mass | 564 mg |
| Length | 2.0 cm |
| Width | 1.1 cm |
| Height | 0.6 cm |
| EIB Pins | Small |
| Connection | Omnetics 44 Pin, 42 0.03 cm Vias |
| Microdrive | not required |
*Neuralynx is not a distributor of Omnetics parts.
Catalog Number
31-0603-0117
HS-36
Buffered 36 channel headstage with Omnetics 44 connector.
HS-36-LED
Buffered 36 channel headstage with Omnetics 44 connector.
HS-32-mux
32 channel multiplexing (MUX) headstage for digitizing analog neural signals on the headstage.
HS-32-mux-LED
32 channel multiplexing (MUX) headstage for digitizing analog neural signals on the headstage.
Halo-10 Microdrive
Provides up to 10 independently drivable shuttles to position up to 8 tetrodes with 11mm shuttle travel. Two additional shuttles available for fiber optics or reference electrodes.
Harlan 8 Drive
Reusable 8 tetrode drive with solid tip that allows researchers to drill custom exit pattern. For use with standard EIB-36.
Small EIB Pins
Gold pins used for making the connection between the electrode wire and Electrode Interface Board (EIB).
EIB-36 Plating Adapter
A simple interface for allowing impedance measurements during electrode plating of 36 channel electrode interface boards (EIBs), with direct access to each channel.