HS-16-N2T Headstages
Buffered 16 channel headstage compatible with NeuroNexus 16 channel probes.
Connects directly to a NeuroNexus 16 channel probe (CM/OCM/H/HC/P series) without use of adapters.
- Options of shielded Litz wire tether with µDB37 connector or Cooner tether with MDR50 connector, see product options.
- Tracking LEDs optional, see product options.
- 3m standard tether length, custom lengths available.
- Tether wires soldered to circuit board to reduce mass.
Sold Separately:
- Custom tether lengths
From 0.5 to 7 meters.
Catalog Number
Pending #
Product Options
HS-16-N2T
Buffered 16 channel headstage with shielded Litz wire tether and µDB37 connector.
HS-16-N2T Page
HS-16-N2T-LED
Buffered 16 channel headstage with shielded Litz wire tether and µDB37 connector.
HS-16-N2T-LED Page
HS-16-N2T-CNR-MDR50
Buffered 16 channel headstage with Cooner wire tether and MDR50 connector.
HS-16-N2T-CNR-MDR50 Page
HS-16-N2T-CNR-LED-MDR50
Buffered 16 channel headstage with Cooner wire tether and MDR50 connectors.
HS-16-N2T-CNR-LED-MDR50 Page| Channels | 16 |
| References | 1 |
| Differential Stim Lines | 0 |
| Grounds | 4 |
| Mass | 0.6 grams |
| Length | 29.5 mm |
| Width | 11.6 mm |
| Height | 3.1 mm |
*Neuralynx is not a distributor of Omnetics parts or NeuroNexus probes.
MDR50 Breakout Board
Used to make custom (non-standard) signal connections between a headstage tether and the input channel of a Digital Lynx SX.
MDR50 Male-to-Female Tether Extension
Extends any MDR50 connection to allow recording in an adjacent room.
10V Video Tracking LEDs
10V video tracking LEDs for 16/18/27/36 channel and 16 channel QuickClip headstages with LED sockets.
Universal Signal Mouse
For use with HS-8/16/18/27/36 headstages.
Digital Lynx SX
High Performance, Expandable Recording System with Closed Loop Processing