HS-18 Headstages
Buffered 18 channel headstage with shielded Litz wire tether and Omnetics µDB37 connector.
For use with Harlan 4 Drives. Tether wires are soldered directly to circuit board to eliminate the mass of an additional connector. Unlike the HS-16, the HS-18 has differential stim channels and references.
- Options of shielded Litz wire tether with µDB37 connector or Cooner tether with MDR50 connector, see product options.
- Tracking LEDs optional, see product options.
- 3m standard tether length, custom lengths available.
Sold Separately:
- Custom tether lengths
From 0.5 to 7 meters.
Catalog Number
HS-18 31-0601-0105 HS-18-CNR-LED-MDR50 31-0601-0107 HS-18-CNR-MDR50 31-0601-0108 HS-18-LED 31-0601-0109 HS-18-MM 31-0601-0110 HS-18-MM-LED 31-0601-0111
Product Options
HS-18
Buffered 18 channel headstage with shielded Litz wire tether and Omnetics µDB37 connector.
HS-18 PageHS-18-LED
Buffered 18 channel headstage with shielded Litz wire tether and µDB37 connector, and video tracking LED sockets.
HS-18-LED PageHS-18-CNR-MDR50
Buffered 18 channel headstage with Cooner wire tether and MDR50 connector.
HS-18-CNR-MDR50 PageHS-18-CNR-LED-MDR50
Buffered 18 channel headstage with 3m Cooner wire tether and MDR50 connector.
HS-18-CNR-LED-MDR50 PageChannels | 16 |
References | 2 |
Differential Stim Lines | 2 |
Grounds | 1 |
Mass | 0.8 grams |
Length | 28.6 mm |
Width | 12.0 mm |
Height | 3.1 mm |
Input Connector | Omnetics 26 socket |
*Neuralynx is not a distributor of Omnetics parts or NeuroNexus probes.
10V Video Tracking LEDs
10V video tracking LEDs for 16/18/27/36 channel and 16 channel QuickClip headstages with LED sockets.
ADPT-HS-27-ERP-27
Connects the µDB37 output connector of a headstage tether to the MDR50 input of an acquisition system.
ADPT-HS-27-PSR-36
Connects any µDB37 headstage directly to a Saturn Commutator or Slip Ring (PSR-18/36) Commutator.
ADPT-HS-18-DUAL-PSR
Connects two 16/18 channel µDB37 headstages directly to one flex circuit cable of the Saturn Commutator or Slip Ring (PSR) Commutator.
ADPT-HS-18-DUAL-DRS
Connects two 16/18 channel headstages with µDB37 output connectors to a single MDR50 input on an acquisition system.
EIB-18
Provides microwire connections to a 16/18 channel headstage with Omnetics 26 pin connectors.
ADPT-HS-18-Versa
Allows a headstage with Omnetics 26 connectors to fit the VersaDrive-4/8 microdrives.
Universal Signal Mouse
For use with HS-8/16/18/27/36 headstages.
Harlan 4 Drive
Reusable 4 tetrode drive with pre-drilled exit holes. For use with EIB-16 and EIB-16-QC-H.
Warp 16 Drive 8mm
Provides 16 single electrode drives - utilizing “electrode-in-cannula” technology.
Warp 16 Drive 15mm
Provides 16 single electrode drives - utilizing “electrode-in-cannula” technology.
ADPT-Dual-HS-DRS
Connects two 8/16/18 channel headstages with MDR50 connectors to one Digital Lynx Combo Board, Digital Reference Selector (DRS) board or ERP-27 panel.
MDR50 Male-to-Female Tether Extension
Extends any MDR50 connection to allow recording in an adjacent room.
MDR50 Breakout Board
Used to make custom (non-standard) signal connections between a headstage tether and the input channel of a Digital Lynx SX.
Digital Lynx SX
High Performance, Expandable Recording System with Closed Loop Processing
Saturn Commutator
Low profile powered commutator for twist-free tethers, allowing subjects to exhibit more natural behavior and unencumbered movement