HS-16 QC Litz Tether with FLED Support

Lightweight, flexible, shielded Litz wire tether that connects a 16 channel QuickClip® headstage to the Digital Lynx SX system.

For use with Halo-5 Microdrive and Fiber Mounted LEDs (FLEDs). Connects directly to the analog acquisition system with the ADPT-HS-27-ERP-27 adapter OR through the Saturn Commutator.

  • Carries LED drive current to Fiber Mounted LEDs
Configuration Length
1 Meter Tether
1 meter
2 Meter Tether
2 meters
3 Meter Tether
3 meters
Connector 1   Omnetics 26 pin
Connector 2   µDB37
Diameter   2.0 mm
Lengths  1, 2, 3 meters
Shielded   Yes

*Neuralynx is not an Omnetics distributor.


Connects the µDB37 output connector of a headstage tether to the MDR50 input of an acquisition system.

ADPT-HS-27-ERP-27 Page

Buffered 16 channel headstage with QuickClip® connectors.

HS-16-QC Page

Buffered 16 channel headstage with QuickClip® connectors and video tracking LED sockets

HS-16-QC-LED Page
Halo-5 Microdrive

Provides up to 5 independently drivable shuttles to position up to 4 tetrodes with 6mm shuttle travel. 1 additional shuttle available for fiber optics or reference electrodes.

Halo-5 Microdrive Page
15mm or 33mm Fiber Mounted LEDs

Deliver optogenetic stimulation from directly inside a Halo microdrive.

15mm or 33mm Fiber Mounted LEDs Page
Saturn Commutator

Low profile powered commutator for twist-free tethers, allowing subjects to exhibit more natural behavior and unencumbered movement

Saturn Commutator Page
Digital Lynx SX

High Performance, Expandable Recording System with Closed Loop Processing

Digital Lynx SX Page