HS-16-CNR-MDR50
Buffered 16 channel headstage with Cooner wire tether and MDR50 connector.
For use with Warp 16 Drives and Harlan 4 Drives.
Product Options:
- Item Code: Custom tether lengths
- Length: 0.5 – 7 meters
| Channels | 16 |
| References | 2 |
| Differential Stim Lines | 2 |
| Grounds | 1 |
| Mass | 0.8 grams |
| Length | 28.6 mm |
| Width | 12.0 mm |
| Height | 3.1 mm |
| Video Tracking LEDs | none |
| Input Connector | Omnetics 26 socket |
| Output Connector | MDR50 |
| Tether | 3m Cooner wire |
*Neuralynx is not a distributor of Omnetics parts.
Catalog Number
31-0601-0103
EIB-16
Provides microwire connections to a 16/18 channel headstage with Omnetics 18 pin connectors.
EIB-18
Provides microwire connections to a 16/18 channel headstage with Omnetics 26 pin connectors.
ADPT-Dual-HS-DRS
Connects two 8/16/18 channel headstages with MDR50 connectors to one Digital Lynx Combo Board, Digital Reference Selector (DRS) board or ERP-27 panel.
MDR50 Male-to-Female Tether Extension
Extends any MDR50 connection to allow recording in an adjacent room.
MDR50 Breakout Board
Used to make custom (non-standard) signal connections between a headstage tether and the input channel of a Digital Lynx SX.
Warp 16 Drive 8mm
Provides 16 single electrode drives - utilizing “electrode-in-cannula” technology.
Warp 16 Drive 15mm
Provides 16 single electrode drives - utilizing “electrode-in-cannula” technology.
Harlan 4 Drive
Reusable 4 tetrode drive with pre-drilled exit holes. For use with EIB-16 and EIB-16-QC-H.
ADPT-HS-18-Versa
Allows a headstage with Omnetics 26 connectors to fit the VersaDrive-4/8 microdrives.
Digital Lynx SX
High Performance, Expandable Recording System with Closed Loop Processing