ADPT-HS-18-DUAL-PSR
Connects two 16/18 channel µDB37 headstages directly to one flex circuit cable of the Saturn Commutator or Slip Ring (PSR) Commutator.
Each headstage has its own set of references but share the Subject Ground.
Signals:
- 36 pass through
- 1 ground pass through
NOTE: To improve Commutator sensitivity, Zip-tie headstage tethers together at adapter base after connections are made.
| Channels | 32 |
| References | 4 |
| Differential Stim Lines | 4 |
| Grounds | 1 |
| Input Connector | µDB37 X 2 |
| Output Connector | Hirose flex circuit |
| Mass | 16.4 grams |
| Length | 48.5 mm |
| Width | 37.7 mm |
| Height | 13.7 mm |
Catalog Number
31-0602-0102
HS-16
Buffered 16 channel headstage with shielded Litz wire tether and µDB37 connector.
HS-16-LED
Buffered 16 channel headstage with shielded Litz wire tether and µDB37 connector.
HS-18
Buffered 18 channel headstage with shielded Litz wire tether and Omnetics µDB37 connector.
HS-18-LED
Buffered 18 channel headstage with shielded Litz wire tether and µDB37 connector, and video tracking LED sockets.
HS-18-MM
Buffered 18 channel headstage with shielded Litz wire and Mill-Max 18 connector.
HS-18-MM-LED
Buffered 18 channel video tracking headstage with shielded Litz wire and Mill-Max 18 connector.
Saturn Commutator
Low profile powered commutator for twist-free tethers, allowing subjects to exhibit more natural behavior and unencumbered movement
HS-16-QC
Buffered 16 channel headstage with QuickClip® connectors.
HS-16-QC-LED
Buffered 16 channel headstage with QuickClip® connectors and video tracking LED sockets
HS-16 QC Litz Tether
Lightweight, durable shielded Litz wire tether that connects a 16 channel QuickClip® headstage to the Digital Lynx SX system.
HS-16 QC Litz Tether with FLED Support
Lightweight, flexible, shielded Litz wire tether that connects a 16 channel QuickClip® headstage to the Digital Lynx SX system.
HS-27 Litz Tether
Lightweight, durable tether with shielded Litz wire connects a 27 channel Mill-Max headstage to a Digital Lynx SX.