HS-16-CNR-LED-MDR50
Buffered 16 channel headstage with Cooner wire tether and MDR50 connector.
Includes video tracking LED sockets. For use with Warp 16 Drives and Harlan 4 Drives.
Included:
- 2 mounting sockets for 10V video tracking LEDs
- Note: Blue, Red, Green or Infrared 10V Video Tracking LEDs sold separately.
Product Options:
- Item Code: Custom tether lengths
- Lengths: 0.5 – 7 meters
| Channels | 16 | 
| References | 2 | 
| Differential Stim Lines | 2 | 
| Grounds | 1 | 
| Mass | 0.8 grams | 
| Length | 28.6 mm | 
| Width | 12.0 mm | 
| Height | 3.1 mm | 
| Video Tracking LEDs | 2 sockets | 
| Input Connector | Omnetics 26 socket | 
| Output Connector | MDR50 | 
| Tether | 3m Cooner wire | 
*Neuralynx is not a distributor of Omnetics parts.
Catalog Number
31-0601-0102
 
								            10V Video Tracking LEDs
10V video tracking LEDs for 16/18/27/36 channel and 16 channel QuickClip headstages with LED sockets.
 
								            EIB-16
Provides microwire connections to a 16/18 channel headstage with Omnetics 18 pin connectors.
 
								            EIB-18
Provides microwire connections to a 16/18 channel headstage with Omnetics 26 pin connectors.
 
								            Saturn Commutator
Low profile powered commutator for twist-free tethers, allowing subjects to exhibit more natural behavior and unencumbered movement
 
								            Warp 16 Drive 8mm
Provides 16 single electrode drives - utilizing “electrode-in-cannula” technology.
 
								            Warp 16 Drive 15mm
Provides 16 single electrode drives - utilizing “electrode-in-cannula” technology.
 
								            Harlan 4 Drive
Reusable 4 tetrode drive with pre-drilled exit holes. For use with EIB-16 and EIB-16-QC-H.
 
								            ADPT-HS-18-Versa
Allows a headstage with Omnetics 26 connectors to fit the VersaDrive-4/8 microdrives.
 
								            ADPT-Dual-HS-DRS
Connects two 8/16/18 channel headstages with MDR50 connectors to one Digital Lynx Combo Board, Digital Reference Selector (DRS) board or ERP-27 panel.
 
								            MDR50 Male-to-Female Tether Extension
Extends any MDR50 connection to allow recording in an adjacent room.
 
								            MDR50 Breakout Board
Used to make custom (non-standard) signal connections between a headstage tether and the input channel of a Digital Lynx SX.
 
								            Digital Lynx SX
High Performance, Expandable Recording System with Closed Loop Processing

 
			 
					            	 
					            	