HS-16-QC
Buffered 16 channel headstage with QuickClip® connectors.
For use with Halo-5 and Harlan 4 microdrives.
HS-16-QC features Neuralynx’s patented QuickClip® connection method, allowing the headstage to magnetically self-align and then initiate the connection to the electrode interface board with minimal insertion force. Connection is completed with a simple “snap.”
- Near zero insertion force
- No exposed pins to bend or break
- High number of connect/disconnect cycles without loss of signal
Catalog Number
31-0601-0009-A
| Channels | 16 |
| References | 2 |
| Differential Stim Lines | 2 pair |
| Grounds | 1 |
| Mass | 1.4 grams |
| Diameter | 17.0 mm |
| Video Tracking LEDs | none |
| Input Connector | QuickClip 16 |
| Output Connector | Omnetics 26 pin |
| Tether | sold separately |
HS-16 QC Litz Tether
Lightweight, durable shielded Litz wire tether that connects a 16 channel QuickClip® headstage to the Digital Lynx SX system.
HS-16 QC Litz Tether with FLED Support
Lightweight, flexible, shielded Litz wire tether that connects a 16 channel QuickClip® headstage to the Digital Lynx SX system.
Halo-5 Microdrive
Provides up to 5 independently drivable shuttles to position up to 4 tetrodes with 6mm shuttle travel. 1 additional shuttle available for fiber optics or reference electrodes.
Harlan 4 Drive
Reusable 4 tetrode drive with pre-drilled exit holes. For use with EIB-16 and EIB-16-QC-H.
EIB-16-QC
Provides microwire connections to a 16 channel headstage with QuickClip® connectors.
EIB-16-QC-H
Provides microwire connections to a 16 channel headstage with QuickClip® connectors.
Saturn Commutator
Low profile powered commutator for twist-free tethers, allowing subjects to exhibit more natural behavior and unencumbered movement
Digital Lynx SX
High Performance, Expandable Recording System with Closed Loop Processing