FLED Driver
Stand-alone current source driver with 3 output channels for precision real-time stimulus sequencing and delivery
Requires Pulse 2.0 Software. For use with Fiber Mounted LEDs (FLEDs) that are integrated into Halo Microdrives.
LED drive current is delivered through the tether-headstage-EIB differential stimulus channels.
- 3 output channels
- Current pump-based driver topology
- External trigger & set point control
- Reverses bias when outputs are in “OFF” state – eliminating unexpected illumination
Included:
- Pulse 2.0 software interface for defining and storing light stimulus sequences
- 34-pin TTL I/O Cable to synchronize stimulation delivery with Digital Lynx SX/SX-M and Cheetah
- USB cable and power supply
Catalog Number
31-0604-0083
| Current | 350 mA |
| Stimulation Frequency | 5 kHz |
| Output Port (Sync) | 8 bit TTL |
| Input Port (External Triggers) | 8 bit TTL |
| Stim Port | Banana Plugs (3 pairs) |
| Com Port | USB |
| Power | 12 V |
10-Pin Stimulus Cable
Provides banana plug terminations to connect external electrical stimulus sources to the dual differential pair stimulus connections on the front panel of Digital Lynx SX and ERP-27.
15mm or 33mm Fiber Mounted LEDs
Deliver optogenetic stimulation from directly inside a Halo microdrive.
Pulse 2.0
The Pulse 2.0 application works with the FLED Driver stimulation package.
FLED HS-32-MUX
32 channel multiplexing (MUX) headstage for digitizing analog neural signals on the headstage. Includes an attached twisted pair digital tether and µDB25 connector, plus external wires for the FLED drive current signals.
FLED HS-32-MUX-LED
32 channel multiplexing (MUX) headstage for digitizing analog neural signals on the headstage. Includes an attached twisted pair digital tether with µDB25 connector, video tracking LED sockets, and external wires for the FLED drive current signals.
FLED HS-64-MUX
64 channel multiplexing (MUX) headstage for digitizing analog neural signals on the headstage. Includes an attached twisted pair digital tether with µDB25 connector, and external wires for the FLED drive current signals.
FLED HS-64-MUX-LED
64 channel multiplexing (MUX) headstage for digitizing analog neural signals on the headstage. Includes an attached twisted pair digital tether with µDB25 connector, video tracking LED sockets, and external wires for the FLED drive current signals.
LabLynx Portable System
A low-cost, wide bandwidth, portable acquisition system.
Digital Lynx SX
High Performance, Expandable Recording System with Closed Loop Processing