HS-64-mux-LED
64 channel multiplexing (MUX) headstage for digitizing analog neural signals on the headstage.
Headstage includes an attached twisted pair digital tether and µDB25 connector, and video tracking LED sockets. For use with Halo-18, Harlan 12 and Harlan 28 microdrives. The HS-64-mux headstage consists of two 32 channel mux headstages connected to a single tether at the “Y” junction close to the headstages. Combine analog and digital (MUX) headstages on Digital Lynx SX-M systems.
- 30 kHz sampling rate
- 16 bit resolution
- +/- 5 mV input range
- dual fixed reference
Included:
- 2 sockets for 3.3V video tracking LEDs
- Note: Blue, Red, Green or Infrared 3.3V Video Tracking LEDs sold separately.
Sold Separately:
- Digital Lynx SX-M
Purchase new Digital Lynx SX-M or… - Digital Lynx SX-M Upgrade
Upgrade existing Digital Lynx 4/16 SX with the Digital Lynx SX-M Upgrade for a direct connection from MUX headstages to Digital Lynx SX for 16 to 128 channel configurations. Contact sales@neuralynx.com for upgrade details. - MDR50 to uDB25 Tether Extension
Required to connect a Saturn Commutator to a Digital Lynx SX-M. 1 Tether Extension cable per 64 channel MUX headstage. - HS-36 Impedance Plug
Provides different resistance values in banks of 4 channels for multiple testing applications.
HS-64-mux-LED 3 Meter
31-0601-0042
HS-64-mux-LED 2 Meter
31-0601-0040
HS-64-mux-LED 1 Meter
31-0601-0028
| Configuration | Tether Length |
|---|---|
| FLED HS-64-mux-LED-1M | 1 meter |
| FLED HS-64-mux-LED-2M | 2 meters |
| FLED HS-64-mux-LED-3M | 3 meters |
| Channels | 64 |
| References | 2 |
| Differential Stim Lines | 0 |
| Grounds | 2 |
| Mass | 4.5 grams |
| Length | 26.7 mm |
| Width | 19.3 mm |
| Height | 1.9 mm |
| Video Tracking LEDs | 2 sockets |
| Optogenetic LEDs | none |
| Input Connector | Omnetics 44 socket X 2 |
| Output Connector | µDB25 |
| Tether | twisted pair digital |
*Neuralynx is not a distributor of Omnetics parts.
MUX Tether Extension for Saturn Commutator
For use with digital multiplexing (MUX) headstages and Saturn Commutator.
EIB-36
Provides microwire connections to a 36 channel headstage with Omnetics 44 pin connectors.
EIB-36 Narrow
Provides microwire connections to a 36 channel headstage with Omnetics 44 pin connectors.
EIB-36-12TT
Provides microwire connections to two 36 channel headstages with Omnetics 44 pin connectors.
EIB-36-16TT
Provides microwire connections to two 36 channel headstages with Omnetics 44 pin connectors.
EIB-36-24TT
Provides microwire connections to three 36 channel headstages with Omnetics 44 pin connectors.
ADPT-DUAL-HS-MUX
Connects two 16 or 32 channel multiplexing (MUX) headstages to a single MUX port on the Digital Lynx SX-M.
HS-36-mux Impedance Plug
Provides different resistance values in banks of 8 for multiple testing applications on 32/64 channel multiplexing (MUX) headstages.
Halo-18 Microdrive
Provides up to 18 independently drivable shuttles to position up to 16 tetrodes with 11mm shuttle travel. Two additional shuttles available for fiber optics or reference electrodes.
Harlan 12 Drive
Reusable 12 tetrode drive with solid tip that allows researchers to drill custom exit pattern. For use with standard EIB-36-12TT.
Harlan 28 Drive
Reusable 28 tetrode drive with solid tip that allows researchers to drill custom exit pattern. For use with standard EIB-36-24TT.
3.3V Video Tracking LEDs
3.3V video tracking LEDs for FreeLynx telemetry system and digital multiplexing headstages.
Saturn Commutator
Low profile powered commutator for twist-free tethers, allowing subjects to exhibit more natural behavior and unencumbered movement
LabLynx Portable System
A low-cost, wide bandwidth, portable acquisition system.
Digital Lynx SX
High Performance, Expandable Recording System with Closed Loop Processing