FLED HS-32-MUX-LED
32 channel multiplexing (MUX) headstage for digitizing analog neural signals on the headstage. Includes an attached twisted pair digital tether with µDB25 connector, video tracking LED sockets, and external wires for the FLED drive current signals.
For use with Halo-10, Halo-10-Mini, Halo-18 and Warp 32 microdrives.
Combine analog and digital (MUX) headstages on Digital Lynx SX-M systems.
- 30 kHz sampling rate
- 16 bit resolution
- +/- 5 mV input range
- single fixed reference
- external FLED drive current wires
Sold Separately:
- Digital Lynx SX-M
Purchase new Digital Lynx SX-M or… - Digital Lynx SX-M Upgrade
Upgrade existing Digital Lynx 4/16 SX with the Digital Lynx SX-M Upgrade for a direct connection from MUX headstages to Digital Lynx SX for 16 to 128 channel configurations. Contact sales@neuralynx.com for upgrade details. - MDR50 to µDB25 Tether Extension
Required to connect a Saturn Commutator to a Digital Lynx SX-M. 1 Tether Extension cable per 64 channel MUX headstage. - HS-36 Impedance Plug
Provides different resistance values in banks of 4 channels for multiple testing applications.
HS-32-MUX-FLED-LED-1M
31-0601-0065
HS-32-MUX-FLED-LED-2M
31-0601-0067
HS-32-MUX-FLED-LED-3M
31-0601-0069
| Configuration | Tether Length |
|---|---|
| FLED HS-32-MUX-1M | 1 meter |
| FLED HS-32-MUX-2M | 2 meter |
| FLED HS-32-MUX-3M | 3 meter |
| Channels | 32 |
| References | 1 |
| Differential Stim Lines | 0 |
| Grounds | 1 |
| Mass | 2.5 grams |
| Length | 26.67 mm |
| Width | 19.30 mm |
| Height | 1.91 mm |
| Video Tracking LEDs | 2 sockets |
| Optogenetic LEDs | FLEDs |
| Input Connector | Omnetics 44 socket |
| Output Connector | µDB25 |
| Tether | twisted pair digital |
*Neuralynx is not a distributor of Omnetics parts.
EIB-36
Provides microwire connections to a 36 channel headstage with Omnetics 44 pin connectors.
EIB-36 Narrow
Provides microwire connections to a 36 channel headstage with Omnetics 44 pin connectors.
EIB-36-12TT
Provides microwire connections to two 36 channel headstages with Omnetics 44 pin connectors.
EIB-36-16TT
Provides microwire connections to two 36 channel headstages with Omnetics 44 pin connectors.
EIB-36-24TT
Provides microwire connections to three 36 channel headstages with Omnetics 44 pin connectors.
ADPT-DUAL-HS-MUX
Connects two 16 or 32 channel multiplexing (MUX) headstages to a single MUX port on the Digital Lynx SX-M.
HS-36-mux Impedance Plug
Provides different resistance values in banks of 8 for multiple testing applications on 32/64 channel multiplexing (MUX) headstages.
Halo-18 Microdrive
Provides up to 18 independently drivable shuttles to position up to 16 tetrodes with 11mm shuttle travel. Two additional shuttles available for fiber optics or reference electrodes.
Halo-10 Microdrive
Provides up to 10 independently drivable shuttles to position up to 8 tetrodes with 11mm shuttle travel. Two additional shuttles available for fiber optics or reference electrodes.
Halo-10-Mini Microdrive
Provides up to 10 independently drivable shuttles to position up to 8 tetrodes with 6mm shuttle travel. Two additional shuttles available for fiber optics or reference electrodes.
3.3V Video Tracking LEDs
3.3V video tracking LEDs for FreeLynx telemetry system and digital multiplexing headstages.
15mm or 33mm Fiber Mounted LEDs
Deliver optogenetic stimulation from directly inside a Halo microdrive.
MUX Tether Extension for Saturn Commutator
For use with digital multiplexing (MUX) headstages and Saturn Commutator.
Saturn Commutator
Low profile powered commutator for twist-free tethers, allowing subjects to exhibit more natural behavior and unencumbered movement
Digital Lynx SX
High Performance, Expandable Recording System with Closed Loop Processing
LabLynx Portable System
A low-cost, wide bandwidth, portable acquisition system.